Main Access 200600T - Model #200600 T Assmebly Instructions

Step 11: Insert mid riser brace in between risers
and over the tabs.
Step 12: Insert a lower handrail into the hole on
the second step (lower step tread).
SMART STEP
Model #200600T Assmebly Instructions
Step 7: Insert the tabs from lower step assembly to
the slots of the upper step assembly.
Step 8: Align ballast tray between all four risers
under the step.
Step 9: Snap tabs from upper and lower risers into
the ballast tray with a rubber mallet.
Step 10: Insert top step support brace in between
uppers risers.