Mainstays 511400 - How to Operate Your Coffee Maker

HOW TO OPERATE YOUR COFFEE MAKER
NOTE: The appliance has a rated power
of
700W. Before plugging it into the wall
outlet, ensure that the electrical circuit is not overloaded with
other
appliances. This
appliance should always be operated on a separate 120V, 60Hz wall outlet.
CAUTION: Always ensure there is water in the water tank (3) before using the
appliance. Do
not
use the appliance without water. Do
not
use hot water
for
brewing. Do not overfill the water tank (3). Do not use the appliance without the
carafe (8), filter basket (12)
or
a paper filter.
CAUTION: Never leave the appliance unattended during operation.
• Place the appliance on a clean, flat and stable surface.
• Open the lid (1) and place the filter basket (12) in the filter housing (9) (fig. a).
NOTE: Ensure the filter basket (12) is correctly aligned with the filter housing (9).
• Place a suitable paper filter in the filter basket (12) (fig. b).
• Add the required amount
of
ground coffee into the paper filter (fig. c). Do not
overfill it.
NOTE: Depending on the number
of
cups required to be brewed, the amount
of
ground coffee has
to
be adjusted. As a general guideline, use one scoop
of
ground
coffee (approx. 5 grams) per cup.
• Fill the carafe (8) with the required amount
of
fresh water. The water level can be
checked using the water level indicator on the carafe (8) (fig. d).
• Pour the water into the water tank (3) using the carafe (8). The water level in the
water tank (3) can be checked using the water level indicator (10) on the water
tank (3) (fig. e).
• Close the lid (1) (fig. f).
• Place the carafe (8) on the warming plate (7) (fig. g).
NOTE: Ensure the appliance is assembled correctly and completely.
• Connect the plug (4) to a suitable wall outlet (fig. h).
• Place the
1/0
button (6) in the position I to switch the appliance on (fig. i). The
button will illuminate.
7