Mainstays GAZ201500 User Manual

Instruction Manual
Save this Manual for future reference.
Your Gazebo requires assembly prior to use. It is important that you read the
entire manual to become familiar with the unit BEFORE you set up the Gazebo.
Safety Warning and Precautions
WARNING: When using your gazebo, basic safety pre cautions should
always be foll owed to reduce the risk of personal injury and damage to
equipment.
Read all instructions before assembly and using this product.
1
．
Select i deal l ocation. This unit is heavy, and will take you about one-hour
to assembly this item by 4 people at least. Set out all parts on a clear and level
surface prior to assembly. Ideally, the Gazebo should be set up in its desired
location to avoid moving it after assembly.
2
．
Use location. During the process of assembling, especially when lifting
heavy or large parts, pay attention to safety. No one other than those assisting
should be allowed in the work area.
3
．
Tools and Assistance. Ladder is required but not provided. Whenever
possible, assistance is preferred.
4
．
Check for parts available. Before assembling your Pavilion Frame, be
sure that you have all parts described in the Parts List on Page 2. During the
process of unpacking and assembly, please ensure that all the parts
labels(stickers) are always kept with product itself for identification.
5
．
Check for damaged parts. Before assembling your Pavilion Frame check
for damaged parts. Any part that appears damaged should be carefully
checked to determine that it can be assembled properly and perform its
intended function. Any part that is damaged should be properly replaced or
repaired by a qualified technician. If you are missing parts, or ha ve any
damaged parts, please do not return this product to the store. Contact
Customer Service at 1-877-980-6928 (or customerservice @aceevert.com)
Monday through Friday 8:30am to 5:30pm PST. We will be glad to assist
you.
6
．
Refer to assembly diagram. During assembly, it will be helpful to refer to
the assembly diagram on page 3~6.
7
．
Keep children away. Children must never be allowed in the work area. Do
not allow them to handle parts or tools. Do not allow children to climb on the
gazebo after it is assembled.
- 1 -
Art# GAZ201500/5056

Mainstays GAZ201500 Specifications

General

Category	Outdoor Furnishing
Type	Gazebo
Shape	Square
Frame Material	Steel
Canopy Material	Polyester
Dimensions	10' x 10'
Assembly Required	Yes
Product Name	Mainstays

Summary

Safety Warning and Precautions

Select Ideal Location

Choose a clear, level surface for assembly, ideally the gazebo's final location to avoid moving it post-assembly.

Tools and Assistance

A ladder is required but not provided; assistance is preferred for assembly, especially for heavy parts.

Check Parts and Damage

Verify all parts against the parts list and inspect for any damage before assembly.

Customer Service for Missing or Damaged Parts

Contact customer service for missing or damaged parts; do not return to the store.

Keep Children Away

Ensure children are not in the work area, do not let them handle parts or tools, and keep them from climbing the gazebo.

Assembly Steps

Step 1: Connect Side Panels and Crossbeam

Connect the four side panels (A) with the crossbeam (B) using screw bolt (K).

Step 2: Connect Ribs to Frame

Connect the ribs (E) and ribs (C) using screw bolt (H).

Step 3: Attach Ribs to Hub

Connect ribs (E) to the top of hub (F) and ribs (C)/(D) to the bottom of hub (F) using screw bolt (H).

Step 4: Secure Ribs to Side Panels

Connect rib (C) to the side panel (A) using screw bolt (H).

Step 5: Connect Ribs to Crossbeam

Connect rib (E) to the crossbeam (B) using screw bolt (H).

Step 6: Attach Canopies and Secure Base

Place small canopy (J) on ribs (F), main canopy (M) on ribs (C)/(D), and secure side panel base with pegs (G).