This document describes the Mainstays Floating Bluetooth Speaker Light, model MS13-702-002-27, an RGB light and Bluetooth speaker designed for decorative use.
Function Description:
The Mainstays Floating Bluetooth Speaker Light serves as a dual-purpose device, combining an RGB light with a Bluetooth speaker. It is designed to float, making it suitable for use in various settings where a combination of light and music is desired. The device can be controlled both directly via buttons on the unit and remotely using an LED Music Light remote control.
Important Technical Specifications:
- Overall Size: 4.6 x 4.6 x 4.2 inches (11.6 cm x 11.6 cm x 10.6 cm)
- Battery: 1 pc 18650 Li-ion 3.7V 2000mAh (included)
- Charging Method: USB DC5.0V
- Bluetooth Distance: Within 20 meters (20 metros)
- Speaker: 3W X 2 pcs
- Light Mode: RGB Lights
- Waterproof Rating: IPX7
- Working Hour:
- 6-8 hours for lighting (6 horas - 8 horas para la iluminación)
- 2-4 hours for music (2 horas - 4 horas para la música)
Usage Features:
Direct Device Controls:
The device features several buttons on its surface for direct control:
- ON/OFF Button: Long press for 3 seconds to turn the device on or off. The device enters sleep mode after 20 minutes of inactivity and automatically turns off after 60 minutes of inactivity.
- Bluetooth ON/OFF Button: Long press for 5-8 seconds to turn on Bluetooth for pairing (device name: MS Bluetooth Speaker). Long press again for 3 seconds to turn off Bluetooth.
- RGB Light Mode Button: Press to cycle through 7 single colors (red, green, blue, yellow, purple, cyan, white) and 4 color-changing modes (fade, jump, sync lights with music, and turn off).
- Bluetooth Music Previous/Vol- Button: Short press for the previous track; long press to decrease volume.
- Bluetooth Music Next/Vol+ Button: Short press for the next track; long press to increase volume.
- Pause/Bluetooth Phone Answering Button: Short press to pause music; long press to answer phone calls.
- DC IN Port: For charging the device.
- Rope Hole: For attaching a rope, presumably for tethering the floating speaker.
Remote Control (LED Music Light) Features:
The included remote control offers comprehensive control over the device's functions:
- Power Switch (ON/OFF): Turns the device on or off.
- Bluetooth Switch: Activates or deactivates Bluetooth.
- Brightness Control: "Brightness -" and "Brightness +" buttons to adjust light intensity.
- White Light Button: Activates white light.
- Color Selection Buttons: Dedicated buttons for Red, Green, Blue, Yellow, Purple, Cyan.
- Play/Pause Button: Controls music playback.
- Volume Control: "Volume -" and "Volume +" buttons.
- Mute Button: Mutes audio output.
- Previous/Next Track Buttons: Skips to the previous or next song.
- Music Rhythm Button: Syncs lights with music.
- Rainbow Button: Activates a rainbow color mode.
- Pulse Button: Activates a pulse light mode.
Charging:
The device should be charged using the included USB cable. A full charge takes approximately 2.5 hours.
Reminders:
- For first-time use, the device requires an initial charge of 2.5 hours.
- To turn on the device for the very first time, use the ON/OFF Button on the device itself. If the device was off for less than 60 minutes, the remote control's ON button can be used to turn it back on. If it was off for over 60 minutes, the device's ON/OFF Button must be used.
- This product is not a toy and is intended for decorative use only.
Maintenance Features:
- Battery Safety: The remote control contains a coin/button cell battery. Users are warned of a chemical burn hazard if ingested and are advised to keep batteries away from children. If the battery compartment does not close securely, discontinue use and seek medical attention if ingestion is suspected.
- FCC Compliance: The device complies with Part 15 of the FCC Rules. Users are advised that any changes or modifications not expressly approved by the responsible party could void their authority to operate the equipment. If interference occurs, measures such as reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a radio/TV technician are suggested.
- RF Exposure: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
For assistance with assembly, installation, parts, and customer service, email: support@deyucraft.com.
This product is distributed by Walmart Inc. and is made in China.
To Next Page
Need help?
General