12
IMPORTANT NOTICE
The desk is designed to be revertible. Consider the location you prefer to place the desk relative to
your room, two configurations can be available.
8. Depending on your room you can choose the preferred configuration above which suits your needs.
Attach the assembled Return Stretchers (K, L and M) to the previous assembly with one 15 mm Bolt (1)
and two 30 mm Bolts (2) as shown. DO NOT fully tighten the bolts in this step.
F
K
L
M
1
2
K
L
M
F
H
1
2
2
② x 2
① x 1