6
E
G
J
H
I
2
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Orient and attach the Desk Stretchers (H, I and J) between one Side Frame (E) and the Middle Tier
Right Frame (G) with six 30mm Bolts (2) as shown.
② x 6
Assembly Instructions
To Next Page
Loading...
Need help?
General
