Mainstays STANTON - Page 8

8
REQUIRED
(C) Left Armrest x2
RATCHET
Assembly
1. ASSEMBLY SINGLE CHAIR
3. Using Bolts (AA) and (BB) attach Left and
Right Armrest (C&D) to the seat and back.
(D) Right Armrest x2
(AA) Bolt (18MM) x8
(BB) Bolt (30MM) x4
4. Place Seat Cushion(J) and Back Cushion(L)
on the seat.
REQUIRED
(J) Single Chair Seat
Cushion x2
(L) Single Chair Back
Cushion x2