MaintTech CX20 User Manual

Technical Specifications
Input Sensitivity: 100mV/g calibrated at 156,15Hz
Measuring Range: Velocity: 0-200 mm/s RMS
Frequency Range: Total Level: 10-3200Hz
Options: 2-3200 Hz, 10-1000 Hz
Bearing Energy: 2200 Hz-20 000 Hz
Battery Type: 9V 6F22 or similar, Alkaline
Vibration Transducer: M/AC140-2D/003-F,
with 1m Cable and BNC Connector
Sensitivity 100mV/g +/- 15%
Magnet Support: 15 x 20 mm, app. 15kg
Extension Tip: Length 65 mm
The extension tip is attachable directly to the
magnet.
Operating Temperature: -20 to +60°
Warranty Disclaimer
MaintTech warrants the product to be free from defects in material and
workmanship under normal use and service within 2 years from the date of
delivery. If the instrument malfunctions, do not attempt to repair the
instrument yourself, as this will invalidate the warranty. Warranty claimed
products shall be returned prepaid to MaintTech for service. We reserve
the right to repair or to replace defect products.
The accelerometer has Life Time Warranty.
mainttech@live.se
CX20

MaintTech CX20 Specifications

General

Brand	MaintTech
Model	CX20
Category	Measuring Instruments
Language	English

Summary

Technical Specifications

Input Sensitivity

Specifies the device's sensitivity in mV/g, calibrated at a specific frequency.

Measuring Range

Defines the operational limits for measuring Velocity (mm/s RMS) and Total Level (Hz).

Frequency Range

Outlines the frequency spectrum (Hz) covered by the instrument's measurements.

Battery Type

Indicates the type of battery required, e.g., 9V alkaline.

Vibration Transducer

Details the transducer model, connector type, and sensitivity.

Magnet Support

Provides specifications for the magnetic mount's dimensions and holding capacity.

Extension Tip

Describes the length of the extension tip and its attachment method.

Operating Temperature

Specifies the permissible ambient temperature range for device operation.

Warranty Information

Warranty Disclaimer

Outlines MaintTech's product warranty terms, exclusions, and repair procedures.

Lifetime Warranty

Highlights the lifetime warranty specifically for the accelerometer component.

Instrument Functions and Operation

Power Control (ON/OFF)

Instructions for turning the instrument on/off, including auto-shutoff features.

Measurement Modes Selection

How to toggle between Vibration and Bearing Energy measurement modes.

Measurement Condition Notes

Details on how transducer mounting affects the measurement frequency range.

Bearing Energy Interpretation

Guidance on interpreting Bearing Energy values and factors affecting them.