Indicating the camcorder is in Recording Mode
Indicating the remaining power for the device. The
average life of the battery is about 30min. Please
charger your camcorder when the power is low.
When the card is properly inserted and recognized by
the camcorder, this icon will show up. Otherwise it will
be a “X”.
Indicating the sensitivity of the G-sensor you set.
The higher the blue color stands, the more sensitive it
is.
This icon shows up only when motion detection is
enabled. Please disable it while driving.
This Icon shows up when collision/vibration occurs and
followed by device mandatory file protection (see
G-Sensor). You can enable the emergency recording
by pressing the Menu button while recording.
It only shows up in Recording Mode, press the
“Left/MIC” button to turn it On/Off.
GPS dongle required for this function.
When resolution is set to 1920x1080@30P HDR, it
appears. HDR function can achieve more clear images
in dark//dim environment.
GPS dongle required for this function.
GPS dongle required for this function.
Press Left button to enable/disable the front LED light.
Exposure Value, “+” means brighter, “-“ means dimmer
The video resolution you set.
The loop setting time you chosen will be displayed in
the middle of this icon. For the current setting, the loop
time is 3 Minutes.
If enabled, the model number/car plate number/date/
time/ will be displayed on the right bottom corner on the
screen, and this info will be saved on the recording/
pictures.
To Next Page
Loading...
