Need help?Do you have a question about the Majacraft Aura and is the answer not in the manual?
Screws used to attach pedal hinges to the base assembly.
Screws connecting rubber joiners on conrods to the pedals.
Screws for attaching the crank assembly to the drive wheel.
Bolts that hold the base and stem assembly together.
Bolts used to secure the head to the handle.
Lay out components, identify provided and required tools for assembly.
Connect the stem/handle assembly to the base assembly using bolts.
Attach the two pedals to the base assembly using screws.
Mount the drive wheel assembly onto the base and stem/handle assembly.
Attach the bobbin drive pulley and flyer drive pulley to the head.
Mount the spinning head onto the upright with the flyer shaft facing forward.
Install the green flyer drive band and black bobbin drive band.
Attach the aluminium crank assembly to the drive wheel using screws.
Connect the conrods to the pedals using gold screws and green joiners.
Mount the wooden bobbin and flyer onto the flyer shaft.
Apply polish for protection and appearance maintenance.
Explains the modified double drive system and how to adjust tension.
Details adjustments to the black band for yarn uptake strength.
Describes using pulley grooves and flyer speed to control yarn twist.
Encourages experimentation with drive bands for different yarn styles.
Settings for medium strength and slow speed for Sport weight yarn.
Settings for weak strength and fast speed for Lace weight yarn.
Settings for strong strength and slow speed for Bulky yarn.
Detailed steps for adjusting the bobbin drive band tension.
Instructions on how to thread yarn through the flyer components correctly.
General| Brand | Majacraft |
|---|---|
| Model | Aura |
| Category | Spinning Wheels |
| Language | English |
To Next Page
