Majacraft Aura - Majacraft Aura Fastener Identification; Hinge Screws; Joiner Screws; Crank Screws

majacraft
2
Welcome to the Majacraft family
Fastener Details
Congratulaons on purchasing a new Majacra Aura.
We are very proud of this wheel and hope that it allows you to express your creavity in new and excing
ways. It has been developed in collaboraon with Pluckyu (Lexi Boeger) and is a unique variant on a double
drive. Take me to read through the instrucons before assembly, it really is worth it.
One of our goals is to make our wheels as easy and simple to use as possible, so they become almost invisible
as you express your creavity through bre.
If you were not already aware, we have designed all of our cra tools and accessories to be compable with
each other. If you have an interest in a specic technique, we are likely to have specialist accessories that will
t straight on to this wheel or tools to make creang easy. Talk to your dealer, visit our web site or email us
directly and we will do what we can to help.
Thank you for choosing Majacra, it is your belief in us that drive our innovaon and creavity in building
capvang tools for you.
From the team at Majacra, Good spinning!
Hinge screws - 25mm (1”)
To aach the pedal hinges to
the base assembly
Joiner screws - 25mm (1”)
To aach the rubber joiners on
the conrods to the pedals
Crank screws - 32mm (1 1/4”)
To aach the crank assembly to the
drive wheel
Base bolt - JCB 30mm (1 1/8”)
To hold the base and stem assembly
together.
Head bolt - JCB 45mm (1 3/4”)
Secures the head to the handle