To Next PageTo Next Page
Need help?Do you have a question about the Majectic UVLX24RN and is the answer not in the manual?
Provides guidance for the safe installation and operation of the gas log set.
Highlights critical safety precautions to prevent fire, explosion, and injury.
Specifies requirements for qualified installers and proper appliance usage.
Alerts users to the dangers of carbon monoxide and its symptoms.
Emphasizes installation and service must be by qualified personnel.
Instructs to keep fireplace glass doors open during operation for air circulation.
Details prohibitions on burning solid fuels and handling hot surfaces.
Explains the appliance uses room air and requires adequate ventilation.
Specifies minimum required dimensions for the fireplace to ensure proper fit.
Details locations for checking gas pressure on different valve series.
Explains potential odors from impurities and how to alleviate them.
Provides guidance on performance adjustments for high altitude installations.
Lists locations where the appliance must not be installed due to safety risks.
Describes expected smoke and smells during initial use and how to manage them.
Mandates that glass doors must remain open during operation for safety.
Informs about chemicals known to cause cancer and birth defects.
Details essential precautions and warnings for a safe installation process.
Stresses the need for fresh air to prevent poor fuel combustion.
Classifies spaces as unusually tight, confined, or unconfined for ventilation needs.
Defines construction types requiring additional fresh air supply.
Provides a formula to calculate space volume for ventilation requirements.
Details requirements for installing grilles to vent into an adjoining space.
Describes how to vent the room directly outdoors based on BTU output.
Reiterates the necessity of ventilation for confined or tight construction spaces.
Mandates cleaning of the chimney flue and firebox before installation.
Advises against using fans that alter flame patterns or unapproved accessories.
Details necessary preparation steps for the fireplace before installation.
Covers turning off gas, ensuring ventilation, and using proper pipe compound.
Explains requirements for manual ON/OFF valves and line branching.
Details running the gas line through manufactured fireplace components.
Covers gas line access, valve placement, and cleaning for masonry fireplaces.
Explains how to set the damper stop for proper ventilation.
Provides step-by-step instructions for attaching the damper stop bracket.
Specifies how to centrally locate the unit in the fireplace for draft.
Defines minimum clearance from the fireplace front opening to combustible walls.
Specifies the minimum ceiling height required above the fireplace opening.
Details clearance requirements for mantel materials and depth.
Specifies minimum clearance between grate legs and fireplace front edge.
Warns against connecting directly to unregulated LP tanks due to explosion risk.
Instructs on proper pilot lighting procedures to avoid odor and hazards.
Details correct log placement for proper function and to prevent soot.
Warns that incorrect parts or positioning can cause damage or injury.
Details wiring connections for the remote wall switch to the gas valve.
Guides users through the initial startup, including purging air and curing odors.
Describes proper pilot and main burner flame characteristics for optimal performance.
Emphasizes reading safety instructions before attempting to light the appliance.
Provides immediate steps to take if a gas leak is detected.
Step-by-step guide for safely lighting the pilot and main burner.
Details the procedure for safely turning off the gas supply to the heater.
Flowchart to diagnose issues with the Honeywell valve system.
Addresses causes and corrections for pilot ignition failures.
Covers reasons why the pilot flame may extinguish after lighting.
Diagnoses issues preventing gas flow to the main burner.
Warns that logs become very hot and should only be handled when cool.
Prohibits placing foreign materials on logs or in flames to prevent damage/injury.
Outlines components requiring maintenance and general cleaning procedures.
Provides information on how to order replacement parts and required details.
Specifies requirements for the fireplace screen during operation.
Details wiring connections for the remote wall switch to the gas valve.
Protective wall panel for above fireplace and/or mantel applications.
Provides contact details for ordering parts and obtaining further information.
Space to record appliance model and serial numbers for future reference.
Details the conditions and limitations for the appliance and component warranties.
Covers repair or replacement of defective parts within two years of manufacture.
Covers replacement of defective logs/liners within two years, and parts thereafter.
Explains consumer legal rights and how they may vary by state.
States CFM Corporation is not responsible for building code compliance.
General| Brand | Majectic |
|---|---|
| Model | UVLX24RN |
| Category | Indoor Fireplace |
| Language | English |
