Make Noise MMG User Manual

MMG

Make Noise MMG Specifications

General

Brand	Make Noise
Model	MMG
Category	Music Equipment
Language	English

Summary

Limited Warranty

Installation Guide

Product Overview

MMG Panel Controls

Input Controls

Details for DC IN, AC IN, Over Load Indicator, and AC IN Drive.

Mode Controls

Details for MODE Indicator, Panel Control, CV Attenuator, and CV IN.

Frequency and Q Factor Controls

Details for STRIKE, FREQuency panel, CV inputs, Q Factor, and ACCENT.

Output

Details for the single Signal OUTput.

Filter and Low Pass Gate Basics

Understanding MMG Functions

Input Stage Explained

Details on AC IN and DC IN, including signal coupling and processing.

Q Factor and Input Levels

How Q Factor depends on input signal levels and overload indicators.

Mode Control Operation

Explains the sweepable nature of the MODE control and its CV input.

Cut-Off Frequency Controls

Details on FREQ panel control and the two CV inputs.

Q-Factor Control

Details on resonance, Q-Factor, and its relation to input signal levels.

Strike and Accent Inputs

Explanation of the STRIKE and ACCENT input functions.

Output Stage with AGC

Description of the output stage and its Automatic Gain Control (AGC).

Tips and Tricks

Patch Ideas

Practical patching examples like Cicadas and Constant Power.

Calibrating the MMG

Mode Trimmer Calibration

Procedure for calibrating the MODE control using Trimmer 1.

Frequency Trimmer Calibration

Procedure for calibrating the FREQuency control using Trimmer 2.

Q Trimmer Calibration

Procedure for calibrating the Q Factor control using Trimmer 3.

Automatic Gain Control Calibration

Procedure for calibrating the AGC using Trimmer 4.