13
Warning：
User Guide to Aircraft Mode
Space larger than 3m×3m×3m is recommended for indoor ying.
Land: soft surfaces such as carpets and grass may cause interference to the ultrasonic sensor. It is recommended to take o from hard
and at surfaces.
Water: do not start or y the aircraft over water to prevent accidental falling into water, which can cause short circuit and re damage
to the machine.
Outdoors: a windy environment may interfere the aircraft's normal ight.
Before starting, make sure each module is assembled correctly and the protective cover is removed. The protective cover could
aect the airow and aircraft takeo can be interfered. Place the aircraft on an open ground. Ensure no obstacles within a two-meter
radius.
Shutting down power on Makeblock App during ight can cause sudden drop to the aircraft. This may damage the equipment.
Aerobatic ight needs a lager space in order to aviod collisions.
High speed rotating motors and propellers may cause injury. Please keep a safety distance from the aircarft before operating Airblock.
Dust, hair, fur, or water trapped in Airblock may result in motor malfunction or damage to electronic parts.
Operating Environment
To Next Page
Loading...
