16
Direction of battery
contact points
Battery Installation
After a fully charged battery is inserted, Airblock will be
automatically turned on and enters the standby mode.
The LED on the main control module top will display a
white light. When Bluetooth is successfully connected,
the light in front will turn red, and the light at rear will
turn green.
Installation Step 3
Before taking o, please ensure Airblock has its top
facing upward and Airblock is placed on a at ground.
The picture on the right shows the situation when
Airblock has its bottom facing upward.
In Aircraft mode, the protective cover must be
removed.
Warning：
User Guide to Aircraft Mode
To Next Page
Loading...
