29
Programming
Step 1
Follow the instructions on the first page of User Guide to download and install the application. Open
the Makeblock application and move the tablet or smartphone close to the running Airblock, Bluetooth
connection should be paired.
Examples for reference: http://learn.makeblock.com
Tap on the "New Project" option and select "Customize" to create a new controlling program for Airblock
In "DESIGN" mode, drag and drop required keys modules into the edit area on the right. Tap on the module to
enter the "Code" mode.
In "Code" mode, drag the motor speed block to "When button pressed" and enter the corresponding number to
set the motor speed.
At the same time, make sure the motor speed is "0" for "when button released"; otherwise the motor may
continue uncontrolled, which can cause danger.
Examples for reference: http://bbs.makeblock.com
Step 2
Step 3
Step 4
User Guide to Custom Mode
To Next Page
Loading...
