Makeblock neuron Inventor Kit - Gyro Sensor

09
Input Blocks
The gyro sensor is an ideal block for motion and posture detection of your creation. It can be used to measure
the angular rate and the acceleration information of your creation. When it detects a vibration, the sensor will
send out an on signal.
Reference coordinates: Detect a vibration:
Gyro Sensor
Try it now!
1. Press the power button to turn on the chain.
2. Put the block on the desk and thump the desk. The buzzer will activate when the
gyro sensor detects any vibration.
3. Pick up the blocks and rotate it, see what happens.
G
y
r
o
S
e
n
s
o
r
B
u
z
z
e
r
P
o
w
e
r
G
y
r
o
S
e
n
s
o
r
Send out an
on signal
Thump
G
y
r
o
S
e
n
s
o
r
Y-axis
X-axis
Z-axis