Need help?Do you have a question about the Makita 6280D and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Battery Type | Ni-Cd |
| Battery Capacity | 1.3 Ah |
| Chuck Size | 10mm |
| Chuck Capacity | 10mm |
| No Load Speed (Lo) | 400 rpm |
Describes the tool's purpose for drilling and screw driving in wood, metal, and plastic.
Guidelines for maintaining a clean, well-lit, and safe work environment.
Precautions regarding electrical hazards like shock and grounding.
Instructions on how to attach and detach the battery pack from the tool.
Explanation of how to operate the trigger for starting and stopping the tool.
How to change the direction of rotation using the reversing switch.
Guidance on adjusting the tool's speed using the speed change lever.
Steps for inserting and removing drill bits or driver bits from the chuck.
Instructions for performing screwdriving tasks with the tool.
Guidance on how to perform drilling in wood and metal.
Explanation of the tool's parts and functions in Thai.
Technical specifications of the tool models in Thai.
Explanation of symbols used in the manual in Thai.
The tool's purpose for drilling and screw driving in wood, metal, and plastic.
General safety precautions for power tools in Thai.
Safety guidelines for the work area in Thai.
Electrical safety precautions in Thai.
Personal safety precautions in Thai.
Instructions for using and caring for power tools in Thai.
Instructions for using and caring for battery tools in Thai.
Instruction to save safety guidelines for future reference in Thai.
Crucial safety guidelines for handling battery cartridges in Thai.
Advice on how to maximize battery cartridge lifespan in Thai.
Detailed explanation of the tool's functions and operations in Thai.
Steps for attaching and detaching the battery pack from the tool in Thai.
Explanation of how to operate the trigger for starting and stopping the tool in Thai.
How to change the direction of rotation using the reversing switch in Thai.
Guidance on adjusting the tool's speed using the speed change lever in Thai.
How to adjust the torque setting for driving screws in Thai.
Instructions for assembling or preparing the tool in Thai.
Steps for inserting and removing drill bits or driver bits from the chuck in Thai.
Instructions for operating the tool for various tasks in Thai.
Instructions for performing screwdriving tasks with the tool in Thai.
Guidance on how to perform drilling in wood and metal in Thai.
Instructions for maintaining the tool in Thai.
Information about recommended optional accessories in Thai.
To Next Page
