To Next PageTo Next Page
Need help?Do you have a question about the Makita 6723DW and is the answer not in the manual?
General| Idle speed (max) | 220 RPM |
|---|---|
| Screw diameter (max) | - mm |
| Maximum torque (hard applications) | 4.5 N⋅m |
| Reverse | - |
| Product color | Black, Navy |
| Built-in light | Yes |
| Power source | Battery |
| Battery voltage | 4.8 V |
| Battery technology | Nickel-Cadmium (NiCd) |
Weight and Dimensions| Depth | 292 mm |
|---|---|
| Width | 49 mm |
| Height | 60 mm |
| Weight | 420 g |
Maintain a clutter-free workspace to prevent injuries and ensure safety.
Operate in well-lit areas and avoid rain or flammable substances.
Prevent unauthorized access by children and visitors to the tool.
Store tools and batteries in a dry, secure place away from children.
Use the tool for its intended purpose and at its rated speed.
Select appropriate tools and attachments for the task at hand.
Wear suitable clothing, non-skid footwear, and hair covering.
Wear safety glasses, and dust masks if the operation is dusty.
Ensure dust extraction is connected and used properly.
Handle cords carefully, keeping them away from heat and sharp edges.
Use clamps to hold the workpiece for stability and safety.
Maintain proper footing and balance during operation.
Keep tools sharp, clean, and inspect for damage periodically.
Disconnect battery when not in use or before servicing.
Ensure tools are removed before starting operation.
Do not carry the tool with a finger on the switch.
Remain focused and avoid operating when tired.
Inspect for damage and ensure proper operation before use.
Only qualified persons should perform repairs using original spare parts.
Dispose of batteries safely according to manufacturer instructions.
Instructions for charging the battery before first use and subsequent charges.
Steps to insert and remove screwdriver bits from the holder.
How to use the switch for forward, reverse, and stopping the tool.
Instructions on how to turn the LED light on and off.
How to adjust and use the folding handle for different grip positions.
Guidance on placing the bit, applying pressure, and driving screws.
Step-by-step guide for removing the battery for recycling.
