Model No.
Description
PRODUCT
CONCEPT AND MAIN APPLICATIONS
Specifications
Standard equipment
Note: The standard equipment for the tool shown above may differ from country to country.
P 1 / 8
7104L
Chain Mortiser
Based on the current model 7104L, its specifications have been upgraded
to meet the European standards. The front cover has been added
to enclose the cutter chain. Some electrical parts have been changed to
comply with the electromagnetic compatibility-requirement.
This tool is ideal for making mortises and notches quickly. Pivoting chain
bar enables an opearator to make a 130mm long rectangular hole in
three cutting processes without reclamping a workpiece.
Except for Europe, Australia and New Zealand, the current specifications
have been continued.
Dimensions: mm
Width (W)
Height (H)
Length (L)
512 (20-1/8)
298 (11-3/4)
513 (20-1/4)
Max clamp capacity
Protection against electric shock
Max mortise width
transverse
longitudinal
No load speed: min-1=rpm
3,200
Chain blade: mm (")
France: 30 (1-3/16)
Other countries: 16.5 (5/8)
130 (5-1/8)
France: 45 (1-3/4)
Other countries: 31.5 (1-1/4)
308 (12-1/8)
155 (6-1/8)
Grounding
Net weight: kg (")
Power supply cord: m (ft)
5.0 (16.4)
17 (37.5)
Max mortise depth
Chain blade 16.5mm (5/8")* ...... 1 pc
Wrench 13-17 ............................. 1 pc
Oil vessel ..................................... 1 pc
Sharpening holder ass'y
Cutter chain: 15mm (9/16"), 16.5mm (5/8"), 18mm (11/16"), 21mm (13/16") and 24mm (15/16").
**30mm (1-3/16")
**Sprocket 4 for 30mm cutter chain
**Chain bar ass'y for 30mm cutter chain
(**marks: These accessories should be used at the same time. )
*France: 30mm (1-3/16")
L
W
H
Capacity:
mm (")
T
ECHNICAL INFORMATION
Optional accessories
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output(W)
110
230
240
10
5.2
5
50/60
50/60
50/60
1,050
1,140
1,140
680
780
780
1,300
1,500
1,500
Current (A)
To Next Page
Need help?
General
Weight and Dimensions
