Makita 9227C Operating Instructions

9227C
SPECIFICATIONS
Model 9227C
Max. capacities (dia.)
Wool pad ............................................................................................................................................. 180 mm
Abrasive disc ...................................................................................................................................... 180 mm
No load speed (min
–1
) ......................................................................................................................... 0 – 3,000
Overall length ......................................................................................................................................... 470 mm
Net weight ................................................................................................................................................. 3.0 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
Sander Polisher

Makita 9227C Specifications

General

Model	9227C
Power Source	Corded Electric
Voltage	120V
No Load Speed	600 - 3, 000 RPM
Disc Size	7 inch
Spindle Thread	5/8 inch - 11 UNC