EasyManuals Logo

Makita 9924DB User Manual

Makita 9924DB
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Replacing carbon brushes
Remove and check the carbon brushes regularly. Replace
when they wear down to the limit mark. Keep the carbon
brushes clean and free to slip in the holders. Both carbon
brushes should be replaced at the same time. Use only iden-
tical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take out
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
Abrasive belts
Carbon plate
1. Limit mark
1
001145
1. Brush holder cap
2. Screwdriver
1
2
003399

Other manuals for Makita 9924DB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita 9924DB and is the answer not in the manual?

Makita 9924DB Specifications

General IconGeneral
Power850 W
Type of sanderBelt sander
Cable length5 m
Power sourceAC
AC input voltage230 V
Weight and Dimensions IconWeight and Dimensions
Depth355 mm
Width160 mm
Height155 mm
Weight4800 g
Sanding plate size (WxD)76 x 610 mm

Related product manuals