7
Lighting up the lamps
1
004247
CAUTION:
• Do not look in the light or see the source of light
directly.
Pull the switch trigger to light up the lamp. The lamp
keeps on lighting while the switch trigger is being pulled.
The light automatically goes out 10 seconds after the
switch trigger is released.
NOTE:
• Use a dry cloth to wipe the dirt off the lens of lamp.
Be careful not to scratch the lens of lamp, or it
may lower the illumination.
LED indicator
1
004338
The lamp on the tool shows the following functions.
1. LED indicator
1. Front lamp
To Next Page
Loading...
