Makita BHX2500 User Manual (English)

Other manuals for Makita BHX2500

Manual25 pages

Parts Breakdown15 pages

Questions and Answers:

G
glennjohnsonAug 18, 2025
Why does my Makita Blower engine stop soon after starting?
- C
  Colton MorenoAug 18, 2025
  If the Makita Blower engine stops soon after starting, it could be due to: * Insufficient warm-up: Perform a warm-up operation. * Choke lever set to “CLOSE” when the engine is warm: Set it to “CLOSE”. * Clogged fuel filter: Clean the fuel filter. * Contaminated or clogged air cleaner: Clean the air cleaner. * Detached throttle wire: Attach it securely. For an abnormal carburetor or drive system, it is best to request inspection and maintenance.
R
Robert EllisAug 25, 2025
What to do if my Makita BHX2500 Blower engine stops soon after starting?
- S
  Steven WigginsAug 25, 2025
  If your Makita Blower engine stops soon after starting, it could be due to: * Insufficient warm-up. Perform a warm-up operation. * The choke lever is set to “CLOSE” although the engine is warmed up. Set it to “OPEN”. * A clogged fuel filter. Clean the fuel filter. * A contaminated or clogged air cleaner. Clean the air cleaner. * A detached throttle wire. Attach it securely.
M
Matthew BallAug 31, 2025
What to do if my Makita Blower engine does not stop?
- S
  Shannon OneillAug 31, 2025
  If the engine of your Makita Blower does not stop, check for a detached connector and attach it securely. For abnormal electric system, make a request for inspection and maintenance.
C
catherineshafferSep 3, 2025
What to do if my Makita Blower engine stops soon?
- C
  Christy CarlsonSep 3, 2025
  If your Makita Blower engine stops soon after starting, it might not be warmed up sufficiently; perform a proper warm-up operation. Check that the choke lever is set to “OPEN” if the engine is already warm. A clogged fuel filter or a contaminated air cleaner can also cause this issue; clean them accordingly. Additionally, ensure the throttle wire is securely attached. For issues related to an abnormal carburetor or drive system, it's recommended to request inspection and maintenance.
R
Robert BradySep 6, 2025
What to do if the Makita BHX2500 engine does not stop?
- R
  Ricardo MorrisSep 6, 2025
  If the engine of your Makita Blower does not stop, run the engine at idling, and set the choke lever to CLOSE. The possible causes are: * Detached connector: Attach it securely. * Abnormal electric system: Make a request for inspection and maintenance.
J
Jose PayneSep 10, 2025
How to fix a detached plug cap on a Makita BHX2500?
- M
  millerjenniferSep 10, 2025
  If your Makita Blower isn't starting, check if the plug cap is detached and attach it securely.

Makita BHX2500 Specifications

General

Engine Type	4-stroke
Displacement	24.5 cc
Fuel Tank Capacity	0.52 L
Weight	4.4 kg
Power source	Gasoline
Engine displacement	24.5 cc
Max Air Volume	14.5 m³/min
Max Air Speed	145 MPH
Air volume	14.5 m³/min
Air speed	145 MPH
Maximum Air Volume	14.5 m³/min