Makita BO5021 - Specific Safety Rules

Specific Safety Rules
1. Hold the tool firmly.
2. Do not leave the tool running. Operate the tool only when hand-held.
3. This tool has not been waterproofed, so do not use water on the workpiece
4. Ventilate your work area adequately when you perform sanding operations.
surface.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the symbols used for tool.
v ................................. volts
A ................................. amperes
Hz ................................. herts
kg
................................. kilograms
h ................................. hours
min
................................. minutes
S ................................. seconds
'L ................................. alternating current
- direct current
____
.................................
n, ................................. no load speed
5
................................. alternating or direct current
................................. Class II Construction
A ................................. splash-proof construction
A A ................................. watertight construction
... /min
................................ revolutions or reciprocation per minute
@ ................................. number of blow
4