Need help?Do you have a question about the Makita CP100D and is the answer not in the manual?
Ensure power tool plugs match outlets and avoid modifications. Never use adapter plugs.
Prevent contact with earthed surfaces and do not expose the tool to rain or wet conditions.
Remain attentive, use common sense, and always wear appropriate personal protective equipment like eye protection.
Always wear safety goggles compliant with relevant standards to protect eyes from injury.
Use the correct tool for the job and ensure the switch operates properly. Disconnect power before adjustments.
Recharge only with the specified charger and use only designated battery packs. Keep battery away from metal objects.
Avoid contact with ejected liquid, do not use damaged batteries, and avoid fire or excessive temperatures.
Hold by insulated surfaces, hold firmly, and keep hands away from the blade and moving parts.
Read instructions, do not disassemble, stop if operating time shortens, and rinse eyes if electrolyte contacts them.
To Next Page
General
