To Next PageTo Next Page
Need help?Do you have a question about the Makita DCS 520i and is the answer not in the manual?
General| Engine Type | 2-Stroke |
|---|---|
| Displacement | 50.2 cm³ |
| Fuel Tank Capacity | 0.5 L |
| Chain Pitch | 3/8" |
| Chain Gauge | 1.5 mm |
Lists all components included and identifies key parts.
Explains the meaning of various symbols used on the saw and in the manual.
Essential rules for safe operation and preventing kickback.
Further safety measures for all chain saw users.
Requirements for operator health and understanding vibration effects.
Guidance on protective clothing for safe operation.
Instructions for safely carrying and transporting the chain saw.
Safe methods for refueling the chain saw.
Step-by-step guide for starting the engine safely.
How to check and adjust chain tension and idle speed.
Guidelines for holding the saw and making cuts safely.
Explains kickback and provides steps to prevent it.
How chain type and contact affect kickback force.
Importance of chain sharpness for reducing kickback.
How to avoid pushback and pull-in during cutting.
Preparation and considerations for safe tree felling.
Steps for clearing the base and establishing escape paths.
How to cut the felling notch and the importance of the hinge.
Technique for cutting trees larger than the guide bar.
Dangerous technique for larger timber, requires training.
Safe practices for cutting logs into sections.
How to safely remove branches from a fallen tree.
General advice on maintaining the saw for longevity and safety.
Proper procedures for storing the chain saw.
Labeled diagram of all chainsaw parts with their numbers.
Detailed technical specifications for different models.
Lists approved guide bars and chains for kickback safety.
Step-by-step instructions for assembling the guide bar and chain.
How to check and maintain proper chain tension.
Instructions on how to use the chain brake manually.
Correct gasoline and oil mixing ratios for the engine.
Information on chain oil types and safe handling practices.
How to adjust the oil pump for proper chain lubrication.
Step-by-step guide for starting a cold engine or under special conditions.
How to start a warm engine and properly stop it.
How to test the chain brake for proper operation.
Guide to adjusting carburetor for optimal performance.
Tips for operating the saw in cold, humid conditions.
When and how to sharpen the saw chain for optimal cutting.
Correct angles for cutters and depth limiter adjustment.
How to clean internal components and the suction head.
Procedures for replacing the chain and cleaning the spark arrester.
Steps for cleaning and maintaining the air filter and prefilter.
How to replace the spark plug and check the electrode gap.
Steps for replacing the starter cable and return spring.
Instructions for correctly mounting the fan housing.
Routine checks for the saw, chain, and brake.
Maintenance tasks to perform weekly, monthly, and annually.
Importance of using original Makita spare parts.
Identifies common malfunctions and their causes.
How to identify and order specific part numbers and accessories.
