EasyManua.ls Logo

Makita DCS231T User Manual

Makita DCS231T
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Original Instruction Manual
Instructions d’emploi d’origine
Originalbetriebsanleitung
Manuale di istruzioni originale
Originele gebruiksaanwijzing
Instrucciones de manejo originales
Instruções de serviço original
Original brugsanvisning
Πρωττυπο εγχειρίδιο οδηγιών
Orijinal Kullanım Kılavuzu
Important:
Read this instruction manual carefully before putting the chain saw into operation and strictly observe the safety regulations! Only persons who have completed
training in working from elevated platforms (cherry pickers, lifts), from platforms mounted on ladders or who are proficient in climbing with ropes are permitted to
operate this chain saw.
Keep this Instruction Manual!
Attention:
Lire attentivement ce manuel avant la première mise en service et observer absolument les prescriptions de sécurité! C'est pourquoi ces tronçonneuses ne peu-
vent être manipulées que par des opérateurs ayant reçu une formation complémentaire pour travailler en nacelle ou pour utiliser la technique de la descente en
rappel!
Garder avec soins le manuel des instructions d’emploi!
Achtung:
Lesen Sie vor der ersten Inbetriebnahme diese Betriebsanleitung gründlich durch und befolgen Sie unbedingt die Sicherheitsvorschriften! Diese Motorsäge darf
nur von „Motorsägenführern mit Zusatzausbildung für Arbeiten in Hub- oder Leiterkörben bzw. Seilklettertechnik” bedient werden!
Betriebsanleitung sorgfältig aufbewahren!
Attenzione:
Osservare attentamente le norme di sicurezza. Errori nell’uso della motosega possono essere causa di incidenti! Questa motosega va utilizzata esclusivamente
da “operatori appositamente addestrati per eseguire lavori con motoseghe e addestrati inoltre per eseguire lavori in ceste sollevabili o di conduzione e con impi-
anti ascensionali con funi”.
Conservare accuratamente le istruzioni d’impiego!
Belangrijk:
Voordat u de machine de eerste keer in gebruik neemt moet u deze gebruiksaanwijzing zorgvuldig doornemen. U dient er vooral op te letten dat u alle veiligheids-
voorschriften goed heeft begrepen zodat u die strikt in acht kunt nemen! Deze motorzaag mag uitsluitend door “motorzaagbestuurders met extra scholing voor het
werken in hef- of ladderkooien, resp. bekend zijn met de touwklimtechniek” worden bediend.
Berg de gebruiksaanwijzing goed op!
Atención:
Es indispensable leer con mucha atención las instrucciones de manejo antes de utilizar la motosierra por primera vez. ¡Preste especial atención a las recomen-
daciones de seguridad!
Esta motosierra sólo podrá ser manejada por “usuarios de motosierra con formación complementaria” para realizar trabajos con cestos de elevación o de escal-
eras o bien técnica de trepar con cuerdas.
Conservar cuidados los instrucciones de manejo.
Atenção:
Antes da primeira colocação em serviço, ler atentamente estas instruções de serviço e seguir sem falta as normas de segurança! Essa moto-serra deve somente
ser utilizada por “condutores de moto-serra com formação extra para trabalhos em caixa elevadora, em caixa de escada ou em técnica de escalar com cordas”!
Guardar bem as instruções de serviço!
Obs:
Læs venligst denne betjeningsvejledning omhyggeligt igennem, inden maskinen tages i brug, og overhold under alle omstændigheder sikkerhedsreglerne. Denne
motorsav må kun betjenes af “kædesavsførere, der er specialuddannede til arbejde i lift- eller stigekurve resp. i tovklatringsteknik”!
Opbevar betjeningsvejledning omhyggeligt.
Σημαντικ:
Διαβάστε αυτ το εγχειρίδιο οδηγιών προσεκτικά πριν βάλετε το πρινι αλυσίδας σε λειτουργία και τηρείτε αυστηρά τις οδηγίες ασφάλειας! Μνο
άτομα που έχουν εκπαιδευτεί σε εργασία απ ανυψωμένες πλατφρμες (συλλέκτες κερασιών, ανυψωτήρες), απ πλατφρμες τοποθετημένες σε
σκάλες ή που είναι ικανοί σε αναρριχήσεις με σχοινιά, επιτρέπεται να λειτουργούν αυτ το πρινι αλυσίδας.
Κρατείστε αυτ το εγχειρίδιο Οδηγιών.
Önemli:
Zincir testereyi kullanmadan önce bu kullanma kılavuzunu dikkatle okuyun ve güvenlik yönetmeliklerine kesinlikle uyun! Sadece yüksek platformlarda (sepetli
vinçler, asansörler), merdivenlere monte edilen platformlarda çalışma eğitimini tamamlamış veya halatlarla tırmanma konusunda usta olan kişilerin bu zincir
testereyi kullanmasına izin verilir.
Bu Kullanma Kılavuzunu saklayın!
DCS230T
DCS231T
DCS232T

Table of Contents

Questions and Answers:

Makita DCS231T Specifications

General IconGeneral
Engine Type2-stroke
Power SourcePetrol
Displacement22.2 cc
Power Output0.74 kW
Chain Gauge0.050"
Fuel Tank Capacity0.2 L
Oil Tank Capacity0.19 L
Weight2.5 kg
Bar Length25 cm (10")
Chain Pitch3/8 inch

Summary

SAFETY PRECAUTIONS

General Precautions

General safety rules for operating the chain saw and user responsibilities.

Protective Equipment

Mandatory personal protective equipment (PPE) for safe chain saw operation.

Fuels / Refuelling

Instructions and precautions for handling fuel and refueling the chain saw.

Putting into Operation Safety

Steps and safety checks before starting the chain saw.

Kickback Prevention

Explanation of kickback and how to prevent it for safe operation.

Working Behavior and Methods

Guidelines for safe working practices and operational methods.

Transport and Storage

Procedures for safely transporting and storing the chain saw.

First Aid

Information on what to do in case of an accident and how to call for help.

Vibration Effects

Information on vibration effects and symptoms on the user's health.

Technical Data

Denomination of Components

Identification and labeling of the different parts of the chain saw.

Putting Into Operation

Mounting the Guide Bar and Saw Chain

Step-by-step guide for attaching the guide bar and saw chain to the saw.

Tightening and Tensioning the Saw Chain

Procedures for tightening and checking the tension of the saw chain.

Chain Brake Operation

Explanation and function of the chain brake mechanism.

Fuel and Oil Handling

Instructions for fuel types, mixture, storage, chain oil, and refueling precautions.

Lubricating the Chain

Ensuring proper chain lubrication during operation and adjusting the oil flow.

Starting the Engine

Detailed steps for starting the engine, including cold and warm start procedures.

Stopping the Engine

Procedure for safely shutting down the engine.

Checking the Chain Brake

Essential safety check of the chain brake before operation.

MAINTENANCE

Sharpening the Saw Chain

Guide on how to sharpen the saw chain correctly for optimal performance.

Carburetor Adjustment

Instructions on adjusting the carburetor idle speed and nozzle settings.

Cleaning Sprocket, Chain Catcher, and Guide Bar

Procedures for cleaning key components like sprocket, catcher, and guide bar.

Replacing Saw Chain and Suction Head

Steps for replacing the saw chain and suction head for proper function.

Cleaning the Air Filter

Instructions for cleaning or replacing the air filter for optimal engine power.

Periodic Maintenance Schedule

A schedule outlining regular maintenance tasks for the chain saw.

Service, Spare Parts and Guarantee

Maintenance and Repair Recommendations

Guidance on professional maintenance and repair services for the chain saw.

Spare Parts

Importance of using original Makita spare parts and their availability.

Guarantee Information

Information regarding the product guarantee and limitations.

Trouble Shooting

Chain Does Not Run

Troubleshooting steps for when the chain fails to move.

Engine Does Not Start or Only With Difficulty

Diagnosing and resolving issues related to engine starting.

Warm Start Difficulties

Addressing problems with starting the engine when it's already warm.

Engine Starts, But Dies Immediately

Solutions for when the engine starts briefly then shuts off.

Insufficient Power

Identifying and fixing causes of reduced engine power.

No Chain Lubrication

Troubleshooting issues related to the chain oil supply system.

Related product manuals