Need help?Do you have a question about the Makita DDF456 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Torque | 50 Nm |
| No Load Speed | 0-400 / 0-1500 RPM |
| Chuck Capacity | 1.5 - 13 mm |
| Weight | 1.5 kg |
| Max. Drilling Capacity (Steel) | 13 mm |
| Max. Drilling Capacity (Wood) | 38 mm |
| Max. Fastening Torque (Soft) | 36 Nm |
| Type | Cordless Drill Driver |
| Battery Type | Li-ion |
Technical specifications for capacities, speed, weight, and voltage.
Explanation of symbols used on the tool and in the manual.
Tool is intended for drilling and screw driving in wood, metal, and plastic.
Typical A-weighted noise level and uncertainty values.
Vibration total value for drilling into metal according to EN60745.
Comprehensive safety warnings and instructions to prevent injury.
Guidelines for maintaining a safe work environment.
Precautions and warnings related to electrical safety.
Recommendations for operator safety, including PPE.
Specific safety precautions for operating the cordless driver drill.
Guidelines for using and caring for battery-powered tools.
Critical safety instructions for handling and using battery cartridges.
Advice on how to maximize the lifespan of the battery cartridge.
Overview of the tool's functions and features.
Instructions on how to install and remove the battery cartridge.
Explanation of the battery protection system and its functions.
How to operate the front lamp on the tool.
Explanation of how to change the direction of rotation.
How to change the speed setting of the tool.
How to adjust the torque setting for fastening screws.
Instructions for assembling parts of the tool.
Steps to install and remove bits from the chuck.
Information about the tool hook and its installation.
Instructions for installing the optional bit holder.
General guidance on operating the tool.
Detailed steps for performing screwdriving operations.
Guidance for achieving optimal results when drilling into wood.
Instructions for drilling holes in metal materials.
General instructions for maintaining the tool.
Steps for replacing the carbon brushes of the tool.
List of recommended optional accessories for the tool.
To Next Page
