To Next PageTo Next Page
Need help?Do you have a question about the Makita DF330DWE and is the answer not in the manual?
General| Number of gears | 2 |
|---|---|
| Torque settings | 19 |
| Chuck capacity (max) | 10 mm |
| Chuck capacity (min) | 0.8 mm |
| Screw diameter (max) | 5.1 mm |
| Sound pressure level | 70 dB |
| Idle speed (1st gear) | 350 RPM |
| Idle speed (2nd gear) | 1300 RPM |
| Sound level uncertainty | 3 dB |
| Drilling diameter in wood (max) | 21 mm |
| Maximum torque (hard applications) | 24 N⋅m |
| Maximum torque (soft applications) | 14 N⋅m |
| Reverse | Yes |
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Power source | Battery |
| Charging time | 50 min |
| Battery voltage | 10.8 V |
| Battery capacity | 1.3 Ah |
Weight and Dimensions| Depth | 189 mm |
|---|---|
| Width | 53 mm |
| Height | 183 mm |
| Weight | 1000 g |
Specifies the model number of the cordless driver drill.
Details the maximum drilling diameter for steel and wood.
Lists screw sizes suitable for fastening.
Indicates the rotational speed range without load.
Defines the range of bit shank diameters the chuck can hold.
States the total length of the tool.
Specifies the operating voltage of the tool.
Provides the weight of the tool without the battery.
Lists compatible battery cartridges and chargers.
Describes the primary applications for drilling and screw driving.
Details noise level measurements and safety advice.
Outlines vibration levels and safety precautions.
Essential safety guidelines applicable to all power tools.
Specific safety instructions for this cordless driver drill.
General operational safety rules for using the tool.
Precautions for using extended drill bits.
Critical safety advice related to battery use and handling.
Tips for maximizing battery lifespan and care.
Step-by-step guide for battery insertion and removal.
Explanation of the tool's built-in system to protect the battery.
How to use the switch trigger and front lamp.
How to change rotation direction and speed settings.
How to set the torque control for fastening.
Guide on fitting and removing drill bits or driver bits.
Steps for performing screw driving tasks.
How to perform drilling tasks.
Specific guidance for drilling holes in wood.
Specific guidance for drilling holes in metal.
Instructions for using the tool in a screwdriver-only mode.
Guide on how to use the tool's holster accessory.
