Makita DFL083F Series Quick Start Guide

Comparison of products
5/ 6
DFL
082F/ 124F/ 203F/301F/ 402F
DFL
083F/ 125F/ 204F/302F/ 403F
Model
Specifications
No load speed: rpm= min
-1
14.4
700/ 410/ 220/ 260/ 200150 - 700/ 100 - 700/ 100 - 440/ 70 - 230/ 50 - 220
Mechanical clutch
Li-ion
Battery
Dimensions: mm (")
Center height: mm (") Compliance with Homologation LED job light
Weight according to EPTA-Procedure 01/2014: kg (lbs)
Torque shut-off Mechanical clutch Mechanical clutch
Yes
Beeper
Yes
Width
Height
Length
98 (3-7/8)
422 (16-5/8)/ 449 (17-3/4)/ 449(17-3/4)/ 477 (18-3/4)/ 477 (18-3/4)*1
481 (19)/ 481 (19)/ 481(19)/ 520 (20-1/2)/ 520 (20-1/2)*1
74 (2-15/16)
Cell Voltage: V Capacity: Ah Charging time: min.
Soft start
80 - 200
Yes Yes Yes
22, 44, 58, 72, 87
Energy capacity: Wh
Head height: mm (")
Yes Yes
Yes (Blinking yellow )
Yes
YesY
N/A N/A N/A
No No
es
*1 With BL1460A *2 With Battery BL1815N/ BL1830
Torque range:
N·m (in.lbs)
2 - 8/ 5 - 12/ 8 -20/ 16 -30/ 25 - 40
(18 - 71)/ (44 - 106)/ (71 - 177)/ (142 - 266)/ (221 - 354)
2 - 8/ 5 - 12/ 8 -20/ 16 -30/ 25 - 40
Hard joint Soft joint
Indication lamp:
Indication &
Lamp behavior
Warning of power reduction Auto-stop by further power reduction
OK/NOK judgment of each fastening
Maintenance alarm Lamp colors
Battery capacity
Specification Comparison
Blinking red
Solid green for OK/ Solid red for NOK
Solid red
3 (green, red, yellow)
Blinking red/ red/ red/ purple/ purple
Solid green for OK/ Solid red for NOK
Solid red
2 (green, red)
DFL651F
14.4
18
(18 - 71)/ (44 - 106)/ (71 - 177)/ (142 - 266)/ (221 - 354)
1.5, 3.0, 4.0, 5.0, 6.0
1.5, 3.0, 4.0, 5.0, 6.0 1.5, 2.0, 3.0, 4.0, 5.0, 6.0
15, 22, 36, 45, 55 with DC18RC
31.5/ 31.5/ 31.5/ 35/ 35
(1-1/4)/ (1-1/4)/ (1-1/4)/ (1-3/8)/ (1-3/8)
6
13.5/ 16/ 16/ 18/ 18
(1/2)/ (5/8)/ (5/8)/ (11/16)/ (11/16)
16/ 16/ 16/ 18.5/ 18.5
(5/8)/ (5/8)/ (5/8)/ (3/4)/ (3/4)
22, 44, 58, 72, 87
Li-ion
Li-ion
22, 44, 58, 72, 90, 108
15, 22, 36, 45, 55 with DC18RC
15, 24, 22, 36, 45, 55 with DC18RC
25 - 65 (220 - 580)
35(1-3/8)
18.5 (3/8)
3 (green, red, yellow)
Solid green for OK/ Solid red for NOK
Blinking red
Solid red
583 (23) /600 (23-5/8)*2
74 (2-15/16) 75 (2-15/16)
98 (3-7/8)
116 (4-9/16)
2.5 - 2.9 (5.5 - 6.5)See page 2/ 6 and 3/ 6
1.5 - 1.9 (3.4 - 4.2)/ 1.7 - 1.9 (3.6 - 4.2)/ 1.7 - 1.9 (3.7 - 4.2)/ 1.7 -2.1 (3.8 -4.6)/ 1.7 -2.1 (3.8 -4.6)*1
Yes (Blinking yellow )
Yes YesNo/ Yes/ Yes/ No/ No
Programmable speed control
Forward/ reverse setting Number of steps
Program entry
USB
USB
6
Yes
Available at every one of 6 stepsAvailable at every one of 6 steps
28.5/ 31.5/ 31.5/ 34/ 34
(1-1/8)/ (1-1/4)/ (1-1/4)/ (1-5/16)/ (1-5/16)

Makita DFL083F Series Specifications

General

Brand	Makita
Model	DFL083F Series
Category	Power Screwdriver
Language	English