Need help?Do you have a question about the Makita DF001DW and is the answer not in the manual?
General| Product color | Black, Blue |
|---|---|
| Built-in light | Yes |
| Power source | Battery |
| Charging time | 5 h |
| Battery voltage | 3.6 V |
| Battery capacity | 1.5 Ah |
| Idle speed (max) | 220 RPM |
| Screw diameter (max) | - mm |
| Maximum torque (hard applications) | 4 N⋅m |
| Maximum torque (soft applications) | 3 N⋅m |
| Number of bits | 81 pc(s) |
Weight and Dimensions| Depth | 287 mm |
|---|---|
| Width | 47 mm |
| Height | 51 mm |
| Weight | 360 g |
Read all safety warnings and instructions. Save instructions for future reference.
Keep work area clean and lit. Do not operate in explosive atmospheres. Keep bystanders away.
Match plugs to outlets. Avoid body contact with grounded surfaces. Keep tools dry.
Stay alert, use PPE, prevent unintentional start, remove keys, maintain balance, dress properly.
Use the correct power tool for the application for better and safer results.
Ensure the switch works correctly; a faulty tool is dangerous.
Disconnect power before making adjustments to prevent accidental starting.
Store tools out of reach of children and untrained persons.
Check for misalignment or breakage and repair if damaged before use.
Keep cutting tools sharp and clean for easier control and less binding.
Use tool and accessories as instructed, considering conditions and work.
Recharge only with the specified charger; a wrong charger is a fire risk.
Use only specifically designated battery packs to avoid injury and fire.
Keep battery away from metal objects to prevent shorting, burns, or fire.
Avoid contact with ejected electrolyte; flush with water if contact occurs.
Have tool serviced by qualified personnel using identical replacement parts.
Follow instructions for lubricating and changing accessories.
Keep handles dry and free from oil and grease for better grip.
Hold by insulated surfaces to avoid shock from live wires.
Always ensure firm footing for stability and control.
Ensure no one is below when working in high locations.
Hold the tool firmly for secure operation.
Keep hands away from rotating parts to prevent injury.
Do not touch bit or workpiece immediately after use; they may be hot.
Always secure workpiece in a vise or similar device.
Read all instructions and cautionary markings on charger, battery, and product.
Do not disassemble the built-in battery.
System cuts off power to extend tool/battery life during overheat or overdischarge.
Push switch for forward (A) or reverse (B) rotation; release to stop.
Press the lamp switch to turn the light on or off. Do not look directly at light.
Push bit firmly into holder to install; pull out to remove.
Place driver bit in screw head, apply pressure, switch on. Release switch when flat.
Ensure bit is straight in screw head. For wood screws, predrill pilot hole.
Ensure tool is switched off before inspection. Use authorized service centers.
Never use gasoline, benzine, thinner or alcohol; it may cause damage.
Bring the tool with built-in Li-ion battery to authorized centers for recycling.
Use recommended accessories for safety and performance. Consult service center for details.
Warrants against defects in workmanship and materials for one year from purchase.
Does not apply to repairs by others, wear and tear, abuse, misuse, or alterations.
Excludes indirect, incidental, or consequential damages; limits implied warranties.
Dust from construction activities may contain chemicals known to cause cancer or birth defects.
Work in ventilated area and use approved safety equipment like dust masks.
To Next Page
