To Next PageTo Next Page
Need help?Do you have a question about the Makita DGA508 and is the answer not in the manual?
Defines the tool's purpose for grinding, sanding, and cutting metal/stone without water.
Details A-weighted noise levels and uncertainty according to EN60745, with ear protection warning.
Lists vibration emission values for different work modes and models, according to EN60745.
Emphasizes reading all safety warnings and instructions to prevent electric shock, fire, or serious injury.
Provides safety warnings for grinding, sanding, wire brushing, or abrasive cutting-off operations.
Explains how the tool stops automatically when drawing abnormally high current.
Details the tool's automatic shutdown due to overheating and the indicator status.
Describes automatic shutdown when battery capacity is insufficient.
Explains how to release the tool lock when the protection system repeatedly activates.
Instructions for using the switch lever and lock-off lever for safe operation.
Explains the tool's ability to switch between high speed and high torque based on workload.
Details accidental re-start prevention, electronic torque control, soft start, and electric brake functions.
Specific steps for installing/removing guards on models with locking screws.
Specific steps for installing/removing guards on models with clamp levers.
Instructions for cleaning the tool's air vents and dust cover for optimal performance.
General
