Need help?Do you have a question about the Makita DGA518 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Battery Voltage | 18V |
| Voltage | 18V |
| Disc Diameter | 125 mm |
| Wheel Diameter | 125 mm |
| Arbor Size | 22.23 mm |
| No Load Speed | 3, 000 - 8, 500 RPM |
| Weight | 2.4 - 3.0 kg |
| Switch Type | Slide Switch |
| Electronic Speed Control | Yes |
| Spindle Lock | Yes |
| Spindle thread | M14 |
Technical specifications for DGA417, DGA418, DGA467, DGA468, DGA517, DGA518 models.
Lists compatible battery cartridges for the tool.
Explains symbols used in the manual and on the equipment.
Typical A-weighted noise levels determined according to EN60745.
Vibration emission values for different work modes and grips.
Essential safety guidelines for operating power tools.
Guidelines for a safe environment and electrical precautions.
Personal protective measures to ensure operator safety.
Guidelines for correct operation and maintenance of the power tool.
Advice on charging, using, and maintaining battery cartridges.
Safety warnings common to grinding, sanding, and cutting operations.
Specific safety advice for grinding and cutting tasks.
Understanding and preventing kickback during operation.
Safety guidelines for wire brushing applications.
Extra safety precautions for specific operations like using grinding wheels.
Advice for optimizing battery lifespan and performance.
Important safety precautions for using the wireless unit.
Step-by-step guide for inserting and removing the battery.
How to check the battery charge level using indicator lamps.
How the tool protects itself from excessive load and overheating.
Battery protection and steps to release a locked tool.
How to use the shaft lock for accessory changes.
Explanation of the switch mechanism and safety lock-off lever.
How to adjust speed and the automatic speed change function.
Accidental re-start prevention and electronic torque control.
Explanation of soft start and electric brake features.
Instructions for general assembly and attaching the side handle.
How to install wheel guards for various accessories.
Steps for mounting and dismounting depressed center wheels or flap discs.
Instructions for installing and removing flex wheels.
Guide for installing and removing abrasive discs.
How to connect a vacuum cleaner for dust collection.
General guidance for grinding and sanding tasks.
Specific procedures for using cut-off and diamond wheels.
Instructions for using wire wheel brushes.
Guidelines for using wire cup brushes.
Overview of the wireless activation feature's capabilities.
Step-by-step guide to install the wireless unit into the tool.
Process to link the tool with a compatible vacuum cleaner.
How to activate and use the wireless vacuum function.
Common problems and their solutions for the wireless activation feature.
General maintenance procedures for the tool.
Instructions for cleaning the tool's air vents.
To Next Page
