To Next PageTo Next Page
Need help?Do you have a question about the Makita DLS111 and is the answer not in the manual?
General| Blade Diameter | 190 mm |
|---|---|
| No Load Speed | 4400 rpm |
| Battery Voltage | 18 V |
| Weight | 26.6 kg |
| Voltage | 18 V |
| Bevel Angle | 0° - 45° left |
Details cutting capacities for miter and bevel angles.
Provides cutting capacity for crown molding and horizontal use.
Indicates that the instruction manual should be read.
Warns against looking into the laser beam.
Advises on preventing injury from flying debris.
General safety advice applicable to all power tools.
Specific safety instructions for using mitre saws.
Handle and store battery cartridges safely, avoiding damage, shorts, and extreme temperatures.
Use batteries only with specified products and follow disposal regulations.
Tips for charging batteries to maintain optimal life and performance.
Safe handling, environmental use, and proximity rules for the wireless unit.
Careful handling, terminal protection, and battery removal during installation.
Instructions for installing the grip onto the tool.
Guide for connecting the dust extraction hose.
Procedure for securely mounting the tool to a workbench.
Steps to install and remove the battery cartridge.
Explains overload, overheat, and overdischarge protection features.
How to interpret the battery level indicators.
Description of the automatic speed change function.
How to operate and maintain the blade guard.
How to turn the laser beam on and off using the switch.
Loosen the laser adjustment screw counterclockwise.
Slide the adjusting screw to adjust laser line position.
Firmly tighten the laser adjustment screw after positioning.
Align laser line to the left of the blade for left-side cuts.
Align laser line to the right of the blade for right-side cuts.
Procedure for adjusting the 45 degree bevel angle.
Steps to adjust the laser line position for accuracy.
