FUNCTIONAL
DESCRIPTION
Switch action
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the
"OFF"
position when released.
To start the tool, simply pull the trigger.
Tool
speed is increased
by
increasing pres-
sure on the trigger. Release the trigger to
stop. For continuous operation, pull the
trigger and then push the lock lever
upward.
To
stop the tool from the locked position,
pull the trigger fully, then release
it.
.
Reversing switch action
CAUTION:
*Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
direction of rotation before the tool stops
may
damage the
tool.
This tool has
a
reversing switch to change
the direction
of
rotation. Move the revers-
ing switch lever to the
C=
position (A side)
for clockwise rotation or the
e
position
(B
side) for counterclockwise rotation.
~
Reversing
switch
lever
\
I
6
To Next Page
Loading...
Need help?
General
