To Next PageTo Next Page
Need help?Do you have a question about the Makita DTW281RTJ and is the answer not in the manual?
Provides detailed safety instructions and precautions for handling and using the battery cartridge.
Offers advice on how to maximize the lifespan and performance of the battery.
Explains the basic functions and operation of the tool.
Details the procedure for installing and removing the battery cartridge.
Explains the function of the battery protection system and its automatic power cut-off.
Describes how to check the remaining battery level using the LED display.
Explains how to turn on and use the tool's integrated front lamp.
Details how to operate the main switch trigger for starting and stopping the tool.
Explains how to use the reversing switch to change the direction of tool rotation.
Describes how to adjust the impact force in three different modes (hard, medium, soft).
Advises on choosing the correct socket and explains installation procedures.
Details how to install and use the tool's hanging hook.
Provides instructions on holding the tool and fastening bolts/nuts.
Lists factors like battery discharge, socket wear, and bolt type that affect torque.
Outlines essential safety precautions and recommendations for tool maintenance.
Lists recommended accessories and attachments for the tool.
Presents typical noise levels and vibration emission values for the tool.
Provides detailed safety instructions and precautions for handling and using the battery cartridge.
Offers advice on how to maximize the lifespan and performance of the battery.
Explains the basic functions and operation of the tool.
Details the procedure for installing and removing the battery cartridge.
Explains the function of the battery protection system and its automatic power cut-off.
Describes how to check the remaining battery level using the LED display.
Explains how to turn on and use the tool's integrated front lamp.
Details how to operate the main switch trigger for starting and stopping the tool.
Explains how to use the reversing switch to change the direction of tool rotation.
Describes how to adjust the impact force in three different modes (hard, medium, soft).
Advises on choosing the correct socket and explains installation procedures.
Details how to install and use the tool's hanging hook.
Provides instructions on holding the tool and fastening bolts/nuts.
Lists factors like battery discharge, socket wear, and bolt type that affect torque.
Outlines essential safety precautions and recommendations for tool maintenance.
Lists recommended accessories and attachments for the tool.
Presents typical noise levels and vibration emission values for the tool.
General| Type | Impact Wrench |
|---|---|
| Voltage | 18V |
| Max Torque | 280 Nm |
| Battery Type | Li-ion |
| Battery Capacity | 5.0 Ah |
| Power Source | Battery |
| Drive Shank | 1/2 inch square |
| Drive Size | 1/2" |
