Need help?Do you have a question about the Makita DTW700 and is the answer not in the manual?
General| Max Torque | 700 Nm |
|---|---|
| Drive Size | 1/2 inch |
| No Load Speed | 0 - 2, 200 rpm |
| Impacts Per Minute | 0 - 2, 700 ipm |
| Voltage | 18V |
| Length | 170 mm |
| Battery Type | Lithium-Ion |
| Blows Per Minute | 0 - 2, 700 bpm |
| Impact Rate | 0 - 2, 700 ipm |
Details model variants, fastening capacities, and square drive size.
Lists no-load speed, impacts per minute, length, voltage, and weight.
Lists compatible battery cartridges and chargers for the tool.
Explains symbols, intended use, and noise levels.
Essential safety precautions for operating power tools.
Outlines safety measures for the work environment.
Covers crucial safety guidelines related to electrical hazards.
Details personal safety measures to prevent injuries.
Guidelines for proper use and maintenance of power tools.
Instructions for using and caring for battery-powered tools.
Guidelines for professional servicing and maintenance of the tool.
Critical safety precautions specific to operating the cordless impact wrench.
Essential safety instructions for handling and using the battery cartridge.
Tips for extending the lifespan and performance of the battery.
Overview of the tool's main operational features and systems.
Step-by-step guide on how to install and remove the battery cartridge.
Details overload, overheat, and overdischarge protection mechanisms.
Instructions on how to view the remaining battery charge.
Explains the meaning of indicator lamps for battery status.
Instructions on how to use and control the front LED lamp.
Details how to operate the tool using the switch trigger.
Explains how to change the tool's rotation direction using the reversing switch.
How to select and adjust the impact force across four levels (Max, Hard, Medium, Soft).
Details various bolt modes (Clockwise/Counterclockwise) for specific fastening tasks.
Enables maximum tool speed regardless of trigger pressure.
Guidance on choosing the right size impact socket for proper fastening.
Instructions for attaching various types of impact sockets to the tool.
Steps to attach the tool's hanging hook for temporary storage.
Using the hanging hole and ring for securing or hoisting the tool.
How to hold and operate the tool for fastening bolts or nuts.
Charts showing recommended fastening torque and time for bolts.
Safety guidelines and warnings before performing inspection or maintenance.
List of recommended accessories for use with the tool.
To Next Page
