Need help?Do you have a question about the Makita DUB361 and is the answer not in the manual?
General| Voltage | 36 V |
|---|---|
| Air Volume | 2.6 - 4.4 m³/min |
| Air Speed | 65 - 93 m/sec |
| Battery Type | Li-Ion |
| Power Source | Battery |
The tool is intended for blowing dust.
Read instructions, familiarize with controls and correct use.
Obtain ear protection, safety glasses, wear footwear and long trousers.
Operate on firm surface, never point at anyone, avoid blocking inlets.
Avoid touching terminals with conductive material or storing with metal objects.
Slide cartridge from tool, align tongue with groove, push until it clicks.
Tool automatically stops when drawing abnormally high current. Turn off and restart.
Tool stops if battery overheats. Let battery cool before restarting.
Indicator blinks when capacity is low. Tool stops, indicator lights up 10s.
Push long nozzle onto blower outlet until it clicks into place.
Hold blower firmly, move slowly, direct nozzle away from obstacles.
Wipe outside of tool with a cloth dampened in soapy water.
Check carbon brushes regularly. Replace when worn to limit mark.
To Next Page
