EasyManuals Logo

Makita ELM3311 User Manual

Makita ELM3311
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
- whenever the machine
starts vibrating abnormally.
34. Children are not allowed to
use the machine.
35. This appliance is not intended
for use by persons with
reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
36. If the external flexible cable or
cord is damaged, it shall be
exclusively replaced by the
manufacturer or his service
agent or a similar qualified
person in order to avoid a
hazard (not lighter than
H05VV-F 2 x1.0 mm
2
or
H05RN-F 2 x1.0 mm
2
).
37. Instructions for the safe
operation of the appliance,
including a recommendation
that the appliance should be
supplied via a Residual
Current Device (RCD) with a
tripping current of not more
than 30 mA.
38. Be careful during adjustment
of the machine to prevent
entrapment of the fingers
between moving blades and
fixed parts of the machine.
39. Always allow the machine to
cool before storing.
40. When servicing the blades be
aware that, even though the
power source is switched off,
the blades can still be moved.
41. Replace worn or damaged
parts for safety; Use only
genuine replacement parts
and accessories.
42. Be careful during adjustment
of the appliance to prevent
entrapment of the fingers
between moving blades and
fixed parts of appliance.
43. If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
3. PARTS DESCRIPTION (Fig. 1)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita ELM3311 and is the answer not in the manual?

Makita ELM3311 Specifications

General IconGeneral
TypePush lawn mower
Cutting width330 mm
Grass catcherYes
Uncertainty K1.5 m/s²
Cutting height55 mm
Cutting systemRotary blades
Rotational speed2900 RPM
Sound power level96 dB
Handle(s) featuresErgonomic, Foldable
Standard deviation3 dB
Vibration emission0.63 m/s²
Sound pressure level75.4 dB
Recommended lawn area400 m²
Minimum cutting height20 mm
Grass collecting volume27 L
Cutting clearance adjustment3
Power sourceAC
AC input voltage230 V
AC input frequency50 Hz
Weight and Dimensions IconWeight and Dimensions
Depth621 mm
Width376 mm
Height312 mm
Weight13000 g

Related product manuals