Why is the grass catcher not filling on my Makita Lawn Mower?
If the grass catcher on your Makita Lawn Mower isn't filling up, try these steps: Adjust the cutting height, allow the lawn to dry before mowing, clean the grille on the grass catcher, and ensure the discharge channel/housing is clean. If the issue persists, have the mowing blade resharpened or replaced at an authorized service center.
How to troubleshoot a Makita ELM4610 Lawn Mower when the motor does not run?
If the motor of your Makita Lawn Mower doesn't run, check the mains connection cable. Start mowing on short grass or an area that has already been mown. Clean the discharge channel/housing to ensure the mowing blade rotates freely. Also, make sure the cutting height is correctly adjusted.
What to do if the motor power drops on my Makita ELM4610 Lawn Mower?
If your Makita Lawn Mower's motor power drops, you should correct the cutting height and clean the discharge channel/housing. If the problem continues, have the mowing blade resharpened or replaced at an authorized service center.
General| Motor Power | 1800 W |
|---|---|
| Cutting Width | 46 cm |
| Cutting Height Adjustment | 20-75 mm |
| Grass Box Capacity | 60 L |
| Power Source | Electric |
| Voltage | 230 V |
| Frequency | 50 Hz |
Warning to keep people away from the operating lawn mower.
Caution regarding sharp cutting blades during maintenance.
Instruction to unplug before servicing or if cord is damaged.
Keep the power cord away from the cutting blades.
Indicates the mower has double insulation for electrical safety.
Instructions for fixing and connecting the folding handles.
Steps for attaching and removing the grass catcher.
To Next Page
