To Next PageTo Next PageWhat to do if the cutting blades of my Makita Saw do not rotate?
If the cutting blades on your Makita Saw aren't rotating, here's what might be happening: * The cutting blades may be improperly attached. Ensure you install the cutting blade properly. * The cutting blades may have caught a twig or other foreign matter. Remove any obstructions. * There may be an abnormal drive system.
Why is my Makita Saw attachment vibrating abnormally?
Abnormal vibration in your Makita Saw's attachment can stem from several issues: * Cutting blades may be broken, bent, or worn. If this is the case, replace the cutting blades. * The cutting blades might be loosely attached. Tighten the bolt securely. * The cutting blades might be irregularly attached. Attach properly. * There may be an abnormal drive system.
What to do if Makita EM407MP Power Tool Accessories attachment vibrates abnormally?
If your Makita Power Tool Accessories attachment vibrates abnormally, immediately stop the motor. This could be due to several reasons. The cutting blades might be broken, bent, or worn, requiring replacement. Alternatively, the cutting blades may be loosely attached, in which case you should tighten the bolt securely or they may be attached irregularly, so you should attach properly. In case of an abnormal drive system, contact an authorized service center for repairs.
Why cutting blades do not rotate on Makita EM407MP Power Tool Accessories?
If the cutting blades of your Makita Power Tool Accessories do not rotate, stop the motor immediately. This can happen if the cutting blade is attached irregularly, so install the cutting blade properly. Also, the cutting blades might have caught a twig, so remove any foreign matter. In case of an abnormal drive system, contact an authorized service center for repairs.
Details the model EM407MP, its dimensions, weight, cutting diameter, gear ratio, and approved power units.
Explains the meaning of various symbols used in the manual for clarity and safety.
Provides essential safety warnings and precautions for operating power tools to prevent injury.
Guidelines for maintaining a safe workspace, avoiding hazards, and ensuring bystander safety.
Critical measures for electrical safety, including cord care, moisture avoidance, and grounding.
Emphasizes operator alertness, use of PPE, and preventing unintentional starts for safe operation.
Covers proper tool application, safe handling, maintenance, and storage to prevent accidents.
Advice on posture, dressing, dust control, and avoiding complacency during operation.
Details necessary personal protective equipment like goggles, hearing protection, and sturdy footwear.
Guidelines for charging, using, and storing battery packs safely to prevent fire and injury.
Specific safety advice for rotary scissors operation, including intended use and operator experience.
Defines the machine's intended purpose and reiterates essential personal protective equipment.
Ensures the machine is safe for operation by checking fuel leaks, fasteners, and parts.
Importance of using sharp, undamaged blades and proper fixing parts for safe cutting.
Safe practices for refueling, including stopping the engine, avoiding flames, and refueling outdoors.
Precautions for starting up, including keeping bystanders away and operating in well-ventilated areas.
Advice on operating in good light, avoiding slippery conditions, and clearing the work area.
Guides on holding the machine, using the harness, ensuring footing, and controlling cutting tool height.
Procedure for stopping the motor and clearing jammed weeds to prevent injury.
Techniques to avoid kickback, such as proper blade application and swinging motion.
Information on vibration-related health risks and how to reduce them.
Guidelines for selecting and using cutting tools, including guards and avoiding incorrect types.
Instructions for servicing, cleaning, and storing the machine and its parts for longevity.
Steps to take in case of an accident, including first aid kit availability and information for help.
Covers specific safety rules for the attachment, like using dedicated blades and removing tools.
Lists and identifies all parts of the attachment as shown in Fig.3.
Crucial warnings before assembling or adjusting the equipment, including power disconnection.
Steps for correctly installing the protector, emphasizing its importance for safety.
Procedure for attaching the pipe to the power unit, ensuring secure installation.
Ensures the cutting tool is properly aligned and all fasteners are tight before operation.
Guidance on holding the machine, starting the motor, and using a half-circle swing for cutting.
Instructions for general inspection, tightening fasteners, and cleaning the tool.
Step-by-step guide on how to safely remove cutter blades, with cautions for handling.
Procedure for removing weeds and debris from the cutter blades and holders.
Guidelines for sharpening cutter blades, including angles, tools, and frequency of sharpening.
Detailed steps for installing new upper and lower blades, ensuring correct orientation.
Instructions for lubricating the gear case with specified grease.
Guidance on applying grease to the drive axle at specified intervals.
Safety advice for storing the attachment, including using blade covers and caps.
A table outlining inspection and maintenance tasks based on operating hours.
Lists common problems, their probable causes, and recommended remedies for the attachment.
General| Brand | Makita |
|---|---|
| Model | EM407MP |
| Category | Power Tool Accessories |
| Language | English |
