To Next PageTo Next Page
Need help?Do you have a question about the Makita ESC125 and is the answer not in the manual?
Describes the tool's core specifications like force, stroke, power, weight, dimensions, and battery type.
Details on wire capacity for copper and aluminum, cycle time, and battery life for crimping operations.
Covers USB connectivity, programmable return modes, access to cycle counts, and software compatibility.
Explains the meaning of different LED indicator states for tool status and battery charge.
Step-by-step guide for installing dies into the tool head, including piston movement and battery removal.
Instructions on how to properly insert and remove the battery pack, including checking contacts and locking mechanism.
How to activate the tool after periods of inactivity or standby mode.
Guidance on warming the tool in cold conditions for optimal performance, including initial crimps.
Detailed procedure for performing crimping operations, including trigger use and piston retraction.
Presents declared A-weighted emission sound pressure level and uncertainty values.
Presents declared 'Hand-Arm' vibration acceleration values for work cycles.
Routine cleaning and care procedures to keep the tool in good working order.
Explanation of the two 3-color LEDs for service status and battery charge indication.
Instructions for checking and refilling the hydraulic fluid level, including tank cap details.
Procedures for verifying and adjusting the tool's output force, including when it's required.
Steps to manually retract the piston using a round tool in case of system failure.
How to configure the piston return mode (automatic vs. manual) via CTDiag software.
Diagnosing and resolving issues related to fitting dies into the tool head, including die compatibility.
Troubleshooting steps for when the tool does not respond upon activation, checking battery and contacts.
Addresses problems like piston not moving, stopping mid-movement, jolting, or moving slowly.
Explains reasons for incomplete crimping and issues with relief valves.
Identifies causes and solutions for oil leaks near the crimping head or within the tool shell.
General| Brand | Makita |
|---|---|
| Model | ESC125 |
| Category | Crimp tool |
| Language | English |
