To Next PageTo Next Page
Need help?Do you have a question about the Makita GA5020 and is the answer not in the manual?
Details technical data including dimensions, speed, and weight for various models.
Explanation of symbols used in the manual and on the equipment for safe operation.
Defines the primary applications and materials the power tool is designed for.
Information on voltage, power source, and insulation for safe electrical connection.
Presents sound pressure and power levels, with uncertainty, for different models.
Details vibration total values for surface grinding and disc sanding modes.
Essential safety precautions applicable to all power tools.
Safety guidelines for grinding, sanding, wire brushing, and cutting-off operations.
Understanding and preventing kickback incidents during operation.
Safety rules for grinding, cutting-off, sanding, and wire brushing tasks.
Further safety advice for specific operations like sanding, wire brushing, and general use.
Explains the purpose and behavior of the tool's indicator lamp.
Details how to use the shaft lock for accessory installation/removal.
Describes how to operate the switch trigger and lock-on/lock-off features.
Procedure for securely attaching the side grip handle.
Instructions for fitting and removing the optional loop handle.
Guidance on mounting standard and clamp lever type wheel guards.
Steps for mounting depressed center wheels and flap discs.
Instructions for fitting abrasive cut-off or diamond wheels.
Procedure for attaching the wire cup brush accessory.
Instructions for fitting the wire wheel brush accessory.
Steps for attaching the hole cutter accessory.
Guidance for fitting dust collecting guards for grinding and cutting-off.
Techniques for grinding and sanding using various discs and wheels.
Procedures for cutting with abrasive cut-off and diamond wheels.
Guidelines for using wire cup and wire wheel brushes.
Instructions for performing hole cutting operations.
Procedure for cleaning the tool's air vents to prevent overheating.
Steps for checking and replacing worn carbon brushes.
Overview of accessory compatibility with different applications and models.
List and description of recommended optional accessories for the tool.
General
