To Next PageTo Next Page
Need help?Do you have a question about the Makita GA5040R and is the answer not in the manual?
General| Spindle thread | M14 |
|---|---|
| Idle speed (max) | 11000 RPM |
| Sound power level | 97 dB |
| Sound pressure level | 86 dB |
| Grinding disc diameter | 125 mm |
| Vibration level (sanding) | 1.5 m/s² |
| Soft grip | Yes |
| Product color | Black, Blue |
| Sound pressure level uncertainty | 3 dB |
| Input power | 1100 W |
| Power source | AC |
Weight and Dimensions| Width | 140 mm |
|---|---|
| Height | 116 mm |
| Length | 303 mm |
| Weight | 2400 g |
Overview of the angle grinder, intended use, power supply, and specifications.
Read all safety warnings and instructions. Failure to follow may result in injury.
Safety warnings for grinding, sanding, wire brushing, or abrasive cutting-off operations.
Press the shaft lock to prevent spindle rotation when installing or removing accessories.
Securely install the side grip handle and wheel guard for operator protection.
Steps for mounting discs, flap discs, and optional super flange.
Instructions for installing various optional accessories like Ezynut, flex wheel, abrasive disc, and dust cover.
Apply the wheel or disc to the workpiece at an angle of about 15°.
Use special guard for cut-off wheels and work perpendicular to the material.
Instructions for using wire cup and wheel brushes safely and effectively.
Procedures for keeping the tool clean and ensuring its longevity.
Recommended accessories for use with the power tool.
Typical A-weighted noise levels for different models according to EN60745.
Vibration total values determined according to EN60745 for various work modes and models.
Declaration of conformity for European countries.
