To Next PageTo Next Page
Need help?Do you have a question about the Makita GA5040C01 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Variable Speed | Yes |
| Vibration | 2.5 m/s² |
| Voltage | 120V |
| Wheel Diameter | 5 inches |
| Spindle Thread | 5/8" - 11 UNC |
| Amperage | 12 Amps |
General safety points applicable to multiple tasks performed with the grinder.
Covers the tool's designated purpose, power connection, and fundamental safety precautions.
Offers practical advice on maintaining grip, positioning, and avoiding hazardous situations to resist kickback.
Guidelines for using specific wheels, guards, and proper mounting techniques to ensure safe operation.
Precautions for cutting depth, wheel binding, workpiece support, and avoiding side pressure on wheels.
Advice on selecting sanding discs, handling wire brushes, and using appropriate guards to prevent injury.
Instructions on using specific wheel types, flanges, and avoiding damage to spindle or lock nuts.
Tips on tool operation, workpiece handling, cleaning vents, and using authorized service centers for repairs.
Details on using the shaft lock for accessory changes and the slide switch for tool operation.
Explanation of the indication lamp's function and the unintentional restart proof device.
Information on adjusting speed, constant speed control, soft start, and overload protection.
Description of the mechanical brake function and instructions for installing the side grip.
Guides for fitting wheel guards and installing depressed center wheels or flap discs.
Information on optional Super flange and Ezynut, including compatibility and installation steps.
Instructions for installing flex wheels, abrasive discs, and dust cover attachments.
Emphasizes not forcing the tool, replacing dropped wheels, avoiding impacts, and preventing kickback.
Proper techniques for holding the tool, applying pressure, and working with wheels at an angle.
Guidance on mounting nuts and flanges for cut-off/diamond wheels based on thickness.
Instructions for operating wire cup and wire wheel brushes, including safety checks and installation.
Advice on ensuring the tool is switched off before maintenance and keeping air vents clean.
Information on recommended accessories and where to seek assistance for their use.
Lists accessories for different models, including guards, wheels, and nuts, with usage notes.
Presents typical noise levels (sound pressure and power) for various models according to EN60745.
Details vibration total values for different work modes and models as per EN60745 standard.
Explains how declared vibration values are measured, used for comparison, and their relation to actual use.
