To Next PageTo Next Page
Need help?Do you have a question about the Makita GA6021C and is the answer not in the manual?
Explains the meaning of symbols used in the manual.
Describes the purpose and applications of the tool.
Details the electrical power requirements and safety for the tool.
Details vibration levels during surface grinding operations.
Details vibration levels during disc sanding operations.
Provides general safety guidelines applicable to all power tools.
Specific safety precautions for operating angle grinders.
Explains kickback and provides precautions to avoid it.
Safety advice for grinding and cutting-off tasks.
Safety guidelines for sanding operations.
Safety advice for wire brushing tasks.
Further safety precautions for various aspects of tool use.
Explains the function and indicators of the tool's lamp.
Describes the function and usage of the shaft lock mechanism.
Details how to operate the tool's switch and lock features.
Explains the function that prevents accidental restart after power loss.
Describes the soft start feature for smoother operation.
Explains the constant speed control feature for consistent performance.
Details the overload protector that prevents motor overheating.
Instructions for attaching the side handle.
Steps for installing and removing the loop handle accessory.
Guide for fitting and removing wheel guards.
Details the clip-on cutting wheel guard attachment.
Instructions for fitting/removing depressed center wheels or flap discs.
Information about the Super flange accessory.
Guide for installing/removing the Ezynut accessory.
Instructions for fitting abrasive cut-off or diamond wheels.
Steps for installing a wire cup brush accessory.
Instructions for fitting a wire wheel brush accessory.
Guide for installing a hole cutter accessory.
Instructions for installing the dust collecting guard for grinding.
Instructions for installing the dust collecting guard for cutting-off.
Guide for installing/removing the dust cover attachment.
How to perform grinding and sanding tasks with the tool.
Instructions for using abrasive cut-off or diamond wheels.
Guide for operating the tool with a wire cup brush.
Instructions for using the tool with a wire wheel brush.
How to operate the tool with a hole cutter.
Instructions for cleaning the tool's air vents.
Steps for replacing worn carbon brushes.
Lists and describes recommended optional accessories for the tool.
General
