To Next PageTo Next Page
Need help?Do you have a question about the Makita GA7021 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| No Load Speed | 6, 600 RPM |
| Voltage | 120V |
| Wheel Diameter | 7 inch |
| Amperage | 15 Amps |
| Spindle Thread | 5/8"-11 UNC |
| Arbor Size | 5/8 inches |
Presents vibration total values for different work modes like grinding and disc sanding.
Essential safety precautions applicable to all power tool operations.
Specific safety instructions for grinding, sanding, wire brushing, and cutting-off tasks.
Guidance on preventing and managing kickback during operation.
Precautions for using cut-off wheels, including avoiding jamming and lateral pressure.
Specific safety advice for sanding operations and using wire brushes.
