To Next PageTo Next Page
Need help?Do you have a question about the Makita Gas nailer GN900SE and is the answer not in the manual?
Cordless framing nailer designed for professional use in timber frames and roofing.
Easily portable machine featuring Lithium-Ion battery technology for professional demands.
Achieve up to 7,200 nails per hour with this fast and versatile cordless nailer.
Features 7.2V battery with 30 min charge time, enabling 4000 nails per charge.
40-gram gas cell supports up to 1200 shots per cell at 2-3 nails per second.
Quick and easy load system for the gas cell.
Indicates battery status (Green: Good, Red: Low/Dead) and error codes (Orange).
Provides a full charge for the 7.2V Li-ion battery in just 30 minutes.
Attached tool for easy adjustment of the nail drive depth.
Guidance on selecting nails based on finish: Bright, Galvanised, and Hot Dip Galvanised.
Guidance on selecting shanks: Smooth, Ring, and Unilock for different joint strengths.
Protects the cylinder from dirt and debris to prevent malfunctions.
Easily clipped onto a belt or extends to sit over joists and scaffolding.
Holds 50mm - 90mm nails with an easy view quick load system.
Features 5-stage depth adjustment and anti-slip contact for precision.
Includes 2 gas canisters and 2,200 nails in various sizes and finishes.
Includes 3 gas canisters and 3,300 nails in various sizes and finishes.
Includes 1 gas canister and 1,100 nails, available in specific sizes and finishes.
General
