Need help?Do you have a question about the Makita HS004G and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | HS004G |
| Category | Cordless Saw |
| Language | English |
Lists compatible battery cartridges and chargers for the tool.
Explains safety symbols used on the equipment for user understanding.
Instructions for proper disposal of electrical waste and batteries in EU countries.
Provides essential safety precautions applicable to all power tools.
Guidelines for maintaining a safe and hazard-free work environment.
Step-by-step guide on how to install and remove the battery cartridge.
Protects tool from damage.
Protects tool/battery from heat.
Protects battery life.
When not in use, store the hex wrench as shown in the figure to keep it from being lost.
Details the process of installing a saw blade without a ring.
Details the process of installing a saw blade with a ring.
Instructions for installing blades with a specific arbor hole size.
Set bevel to 0°, retract lower guard, and check if it moves freely and returns automatically.
Enables clean and comfortable operation by connecting a supported vacuum cleaner to the tool.
Clean dust and dirt on the tool before installing the wireless unit. Insert it in the correct direction.
A Makita vacuum cleaner supporting wireless activation is required for tool registration.
This adjustment has been made at the factory. If it is off, you can adjust it as the following procedure.
To Next Page
